Composite Fence Complete Strong Boards and Aluminium Component
PRODUCT DESCRIPTION
These composite fencing boards, are the hard wearing type, made from the same material / strength as the composite decking. The tongue and groove fit ensures stability, and with the option of a top design detail with a 20cms board ( as image ). No maintenance required and you have the option to make the fence as high as you like. Steel post holder and composite post ensures a solid fence that will last a lifetime.
The boards also have a plain smooth side as well as a slatted line effect on the other side so you can choose the look you prefer.
These boards are not the lightweight PVC fencing ( which can be damaged/ broken easily) that is available through other sellers.
The post are designed to be drilled onto a floor level concrete base and not sunk into the ground.
Each post will have 3 groves for the boards, to enable a long run or a corner fitting panel.
Order you sample for quick delivery, so you can see before you purchase.
PRODUCT FEATURES:
No / low maintenance
No visible screws
Weather resistant
Will not rot , warp or split
Very Strong boards, post, edge trims and fitting. Not PVC .
PRODUCT COMPONENTS:
* Main board – 1750mm wide x 180mm tall x 22mm deep, 10 boards will make a 6ft tall fence.
* Top board - 1750mm wide x 90mm tall x 22mm deep, you can use replace 2 of the main boards and use 3 of these to give the fence a design feature.
* Composite Post and Steel bracket For post – 1800mm high require 1 per fence and one steel bracket ( and an additional 1 for the whole project)
* Steel bracket For post – Require 1 to secure the post to the ground ( you will get one with each post ordered)
* Post cap – Top cap for post , require 1 ( you will receive this with every post)
* Aluminum top/bottom trim – 1750mm long, these bars go at the start and top of the fence to make the whole structure more rigid being aluminum and to leave the fence with a clean edge. Require 2 per fence.
* Corner clip – These fit into the aluminum trim to secure the fence panel, so that they cannot be removed. Require 4 per fence panel ( you will receive 4 of these this with every post)
* Spacing bars – Only use these if you are purchasing the fence panel with spacer design, as these spaces created the gap, require 12 per fence. ( you will receive 12 of these with every 3 of the 90mm high boards)
* Screws – These are used on the corner clips, require 8 per full fence panel (you will receive 4 of these this with every post)
* Fixings – These are used to hold post steel bracket, require 4 per bracket ( you will receive 4 of these this with every post)
below is the items required to make a fence as below
PRODUCT PURCHASE OPTIONS:
Full Board Fence Panel 6ft wide x 6ft tall – this is a full panel fence and will include the below;
10 x main boards at 180mm high
1 x Composite post
1 x Steel bracket For post
1 x Steel post cap
2 x Aluminum top/bottom trims
4 x Corner clip –
4 x Screws –
4 x Fittings
( Please note, you will have to purchase 1 extra post , so that you can finish off the last fence, as you only get one post with each 6ft fence order)
Fence Panel With Spacer 6ft wide x 6ft tall – this is a panel fence with spacer design at top and will include the below ;
8 x main boards at 180mm high
3 x main boards at 90mm high
1 x Composite post
1 x Steel bracket For post
1 x Steel post cap
2 x Aluminum top/bottom trims
4 x Corner clip –
4 x Screws –
4 x Fittings
12 x spacers
(Please note, you will have to purchase 1 extra post , so that you can finish off the last fence, as you only get one post with each 6ft fence order)
Extra Fence Post- you will need this to finish off the last fence panel, you will receive;
1 x Composite post
1 x Steel bracket for post
1 x Steel post cap
4 x Fittings
Due to the weight of the products , there is a minimum spend of £100 for free delivery
Original: $2.95
-65%$2.95
$1.03
Description
PRODUCT DESCRIPTION
These composite fencing boards, are the hard wearing type, made from the same material / strength as the composite decking. The tongue and groove fit ensures stability, and with the option of a top design detail with a 20cms board ( as image ). No maintenance required and you have the option to make the fence as high as you like. Steel post holder and composite post ensures a solid fence that will last a lifetime.
The boards also have a plain smooth side as well as a slatted line effect on the other side so you can choose the look you prefer.
These boards are not the lightweight PVC fencing ( which can be damaged/ broken easily) that is available through other sellers.
The post are designed to be drilled onto a floor level concrete base and not sunk into the ground.
Each post will have 3 groves for the boards, to enable a long run or a corner fitting panel.
Order you sample for quick delivery, so you can see before you purchase.
PRODUCT FEATURES:
No / low maintenance
No visible screws
Weather resistant
Will not rot , warp or split
Very Strong boards, post, edge trims and fitting. Not PVC .
PRODUCT COMPONENTS:
* Main board – 1750mm wide x 180mm tall x 22mm deep, 10 boards will make a 6ft tall fence.
* Top board - 1750mm wide x 90mm tall x 22mm deep, you can use replace 2 of the main boards and use 3 of these to give the fence a design feature.
* Composite Post and Steel bracket For post – 1800mm high require 1 per fence and one steel bracket ( and an additional 1 for the whole project)
* Steel bracket For post – Require 1 to secure the post to the ground ( you will get one with each post ordered)
* Post cap – Top cap for post , require 1 ( you will receive this with every post)
* Aluminum top/bottom trim – 1750mm long, these bars go at the start and top of the fence to make the whole structure more rigid being aluminum and to leave the fence with a clean edge. Require 2 per fence.
* Corner clip – These fit into the aluminum trim to secure the fence panel, so that they cannot be removed. Require 4 per fence panel ( you will receive 4 of these this with every post)
* Spacing bars – Only use these if you are purchasing the fence panel with spacer design, as these spaces created the gap, require 12 per fence. ( you will receive 12 of these with every 3 of the 90mm high boards)
* Screws – These are used on the corner clips, require 8 per full fence panel (you will receive 4 of these this with every post)
* Fixings – These are used to hold post steel bracket, require 4 per bracket ( you will receive 4 of these this with every post)
below is the items required to make a fence as below
PRODUCT PURCHASE OPTIONS:
Full Board Fence Panel 6ft wide x 6ft tall – this is a full panel fence and will include the below;
10 x main boards at 180mm high
1 x Composite post
1 x Steel bracket For post
1 x Steel post cap
2 x Aluminum top/bottom trims
4 x Corner clip –
4 x Screws –
4 x Fittings
( Please note, you will have to purchase 1 extra post , so that you can finish off the last fence, as you only get one post with each 6ft fence order)
Fence Panel With Spacer 6ft wide x 6ft tall – this is a panel fence with spacer design at top and will include the below ;
8 x main boards at 180mm high
3 x main boards at 90mm high
1 x Composite post
1 x Steel bracket For post
1 x Steel post cap
2 x Aluminum top/bottom trims
4 x Corner clip –
4 x Screws –
4 x Fittings
12 x spacers
(Please note, you will have to purchase 1 extra post , so that you can finish off the last fence, as you only get one post with each 6ft fence order)
Extra Fence Post- you will need this to finish off the last fence panel, you will receive;
1 x Composite post
1 x Steel bracket for post
1 x Steel post cap
4 x Fittings
Due to the weight of the products , there is a minimum spend of £100 for free delivery
